Under pressure?

Hydroblasting (high pressure cleaning) damages the fragile cooling fins and compacts dirt and debris into the center of the cooling unit, thus significantly reducing cooling efficiency.

FINFOAM uses a low pressure cleaning method which gently soaks away dirt and debris throughout the entire heat exchanger unit.

ROBOFOAM

FinFoam Cleaning Fins with Lots of Dirt from FINFOAM on Vimeo.

ROBOFOAM Foaming from FINFOAM on Vimeo.

Foaming Video from FINFOAM on Vimeo.

FinFoam Getting it Done from FINFOAM on Vimeo.

ROBOFOAM Rinsing from FINFOAM on Vimeo.

Testimonials

"John, I just wanted to take this opportunity to thank you and your folks for the good job they did in cleaning our Fin Fans. A total of 310 fans were cleaned and all the work was done safely and without the slightest incident. Since our fans were pretty dirty prior to cleaning, we saw a substantial benefit from the work you did. In fact, our calculations show that the cleaning paid out in less than a month! Please pass along our thanks once again to Chad and the rest of the crew for the great work they did."

Larry Johnson

A Southeast Refinery

Case Study - Coker Unit

Eight exchangers with 2 fans each were severely plugged with coke fines and limiting the entire refinery in the southeast. Taking about 1 1/2 hrs per fan FINFOAM finished the job in 2 days and gave operations an additional 25 degrees on their outlet. Previous cleaning attempts by other companies had routinely taken a week and improvements were minimal.

Annual Cost Savings: $3,840,342.00